Front calliper torque settings

[Patto]

Hi all my front rh caliper seems to be dragging , have checked the pistons and One has rust spots on it so have ordered a piston and seal kit off eBay , I was going to split the calliper to rebuild it but can’t find the torque settings for the 4 bolts that hold the calliper together , any clues please

 

[Ralsmith]

I snug mine up plus 1/4 turn and use blue loctite. They have not come loose yet

 

[idk]

About "yea" tight should do it. That is, of course, an Imperial yea, not a metric yea.

Failing that, the manual is in the link in my signature.

 

[Kevin frazier]

Until you do, 22nm, thats too put halves back together only

 

[Patto]

Thank you for the info , will rebuild the calliper once the kit arrives

 

[Kevin frazier]

Keep them babies shined up and theyll stop ya real good.

 

[r3badboy]

Hi all my front rh caliper seems to be dragging , have checked the pistons and One has rust spots on it so have ordered a piston and seal kit off eBay , I was going to split the calliper to rebuild it but can’t find the torque settings for the 4 bolts that hold the calliper together , any clues please

Why split the caliper
You can rebuild them without doing that...

 

[Patto]

Why split the caliper
You can rebuild them without doing that...

It a lot easier to split them and the rebuild kit comes with new seals for were they join together