Free unrestricted maps for Rocket R GT and TFC now online

dougl said:
Pro license not needed. You can register 5 bikes. Is it showing zero bikes registered?
Click to expand...
16 minutes til Wapner.... It doesn't list any bikes, but I did register that one bike. It shows my email address under registered.

I did that before, but it does not list the bike. I checked few minutes ago after seeing your first post and it did have "Update" and it responded with updated, or something. No bikes listed.
 
Journeyman28778 said:
It just shows my email address. I remember registering the bike before though. This does not require a Pro License does it?
Click to expand...

Journeyman28778 said:
16 minutes til Wapner.... It doesn't list any bikes, but I did register that one bike. It shows my email address under registered.
Click to expand...
Click on 3 dots, then License, then it will have "1 bike (4 remaining)"
Click on that and it will have your serial number which shows you're registered
 
Each time you open tuneecu app, you have to click "update" for license. It's nothing to worry about. I'm guessing you're writing the same map over itself hence the error.
Did you check the ETV tables in your map to make sure its penners?
 
Failed!


It's "reprogramming" and failing. It doesn't see a map, or a usable one.
I'm attempting to reload the stock file now.
@Palnet3 Wondering about the registration. It's worked before. It does NOT list my bike, just email address I used to purchase.
Yeah, I definitely tried to load Penner's map, now trying the stock one.

@Penner - sorry to blow up your post. It's obviously not your file. I'm eager to get it in and working. Just trying to figure out what I'm doing wrong and appreciate all those who are sticking with me on this.
 
Being at 0% after 17 minutes suggests something is wrong.
My VIN doesn't appear but a serial number to indicate registration. If you weren't registered, you wouldn't be able to write to the ecu, or basically it wouldn't start writing at all. If you have "4 bikes remaining" then you're registered
My advice before you fry your ecu is to reach out to tom tom at tuneecu FB group.
 
It’s not going to work until you see that your bike is registered under license. To register the bike, connect under ECU and get the green flashing light. The instruction for registering I posted above says that you should go to informations under ECU where you should see your bike, then hit register. Are you not seeing the informations window?
 
That was taken at the very start of the process, so it hadn't done anything and was predicting 17 minutes to go. That changed to 99%, etc. and then, always, "Failed."
 
Tom is a good resource. You have to join Facebook, then join the TuneECU group. You can also email the developer (Alain Fontaine) at meeouf@gmail.com.
 
Journeyman28778 said:
That was taken at the very start of the process, so it hadn't done anything and was predicting 17 minutes to go. That changed to 99%, etc. and then, always, "Failed."
Click to expand...
Best to reach out to tuneecu FB group before you kill your ecu.
 
Journeyman28778 said:
That was taken at the very start of the process, so it hadn't done anything and was predicting 17 minutes to go. That changed to 99%, etc. and then, always, "Failed."
Click to expand...
Sorry we couldn't help. It's hard to diagnose without seeing what's going on.
Last 2 questions.
Did you buy your obdlink from ebay or amazon?
Did you choose "Keihin" ecu with your app?
 
You must log in or register to reply here.

Similar threads

Are Storm models also updatable with maps?
Replies
3
Views
133
2023R3GT
Rocket GT Relay Location
Replies
6
Views
340
Bedifferent
2022 GT/R Tank Bag?
2
Replies
15
Views
465
lotus
Spark Plug Change on 2022 Rocket GT
2
Replies
12
Views
690
Kiwicol
Unrestricted Map for the Rocket GT and GT Tripe Black now online
2 3 4
Replies
32
Views
4K
Van_R3Rider
Menu
Log in
Register