Need a little help from anyone out there. I purchased the David Platt Outlaw exhaust on Ebay,with cat bypass, last week. I was going to install it myself but I just bought a new set of Avon Cobra's I need mounted and balanced. So I asked a well respected mechanic who specializes in Triumph, BSA, Norton but works on all bikes. In fact he owns a Triumph Rocket Roadster. He told me basically that buying these pipes was probably a mistake because if not buying from a big name brand(Jardine ect., )power commander,tuneboy,ect will not have a tune for this set-up and if you also wanted to eliminate the stock airbox for a K+N or RamAIR there would not be a tune either. I said to him if I just go with the new pipes with cat bypass doen't the ECU do the 12 minute remap and he stated he wasn't so sure if this would be sufficient. I went on the power commander web site and for the pcv didn't have a map for the pipes I bought. He further stated that if you can't properly remap, especially if also do the stock air box elimination with the K+N or RamAir you could be headed for problems running the bike to lean or rich. So does anyone know if 1) I only do the pipes with cat bypass does the ECU remap it or is he right that it isn't really going to do what you need, or 2) if I go with the pipes with cat bypass and either K+N's or a RamAir set-up how does one get a remap if there isn't a standard map for this set-up? Any help would be appreciated.