Custom Dynamics LED cluster help

I have an 07 Classic Touring that has the snow cone signal lenses. I thought I did plenty of research here for installing the Custom Dynamics LED clusters, but I guess not. Custom Dynamic part# GEN-18-AR2-1156 for the rear and GEN-8-AW-HW for front. Measured the housing which was good but didn’t measure the inside of the lens and the cluster won’t fit into the lens. Did some serious grinding to the inside of the lens but the cluster still won’t recess in far enough to get lens reattached to the housing completely. Is there a different lens with the two mounting screws to use my original housings? Open to suggestions. thanks

Well that's a bit of a bummer. I made my own conversion parts.



Not aware of any alternate shaped lens.

I put them in my 05 standard & my 14 touring. They must have changed the size because the clusters fit right in to the chrome housings. I put them in the rear only.