Corbin Seat wont latch-in

MCDVX said:

I got the new seat — but it won’t latch-in, I’ve tried everything (and I’ve owned 5 previous Rockets with Corbin seats) but I did look carefully at instructions just to be sure I wasn’t missing anything:
• I slid the saddle into place nose first to engage tongue
— That’s also as secure/far as it can go, but there’s half an inch of space between the groin area where it’s supposed to touch the gas tank (this has nothing to do with the latch locking by the way)
• I lowered the rear into place and pushed firmly on the passenger platform, but it didn’t latch.

Comparing the OEM seat vs. Corbin seat, the latch seems smaller on the Corbin, as it pops right out when it’s supposed to latch (believe me, I tried troubleshooting from every possible approach).

Any ideas before I ask Corbin to fix/replace?

Thanks!

Click to expand...

Kim Turner said:

Had the same problem with the single gunfighter seat. Unscrewed the latch pin and put a couple of washers under it to make it extend further until the whole seat beds in.

Click to expand...

MCDVX said:

PROBLEM SOLVED! Thanks, I tried what you did and loosened the latch bolt and spaced with 2 washers… now it’s a perfect fit! No complaints from me, I also bought the beetle bags and front fairing with stereo kit — with how much it all cost, I could only afford to be optimistic

Click to expand...

biker1059 said:

Please take the sticker off the swing arm. You have the bike looking good.
Another right above the swing arm under seat.

Click to expand...

MCDVX said:

PROBLEM SOLVED! Thanks, I tried what you did and loosened the latch bolt and spaced with 2 washers… now it’s a perfect fit! No complaints from me, I also bought the beetle bags and front fairing with stereo kit — with how much it all cost, I could only afford to be optimistic

Click to expand...