Coil Over Plug mod (COP) for standard coil removal

Fozzie said:

Cheers mate, ive just done ohms check on them all, 1.5 ohm each, so that's ok, it'll be weekend or following that I start fitting, going to get them all wired up and shrink wrapped first, thanks for help!

Click to expand...

Anthony5900 said:

Some Real good information on here, my understanding is R1 coils 2002-2003 to make sure they have the correct resistance, that and to be wire in pairs so both plug red wires to live on the loom, and both black to the trigger wire on the loom, and thats it !

very simple mod in my understanding here and i like the idea of extra space under the tank, also in m pipeline of work is the 3 smaller K&N pods so i can keep the bear claw, and this paired with the coil mod will give me LOTS of room under the tank !.

thanks for the info everyone ! will put this mod on my to do list !

Click to expand...

Fozzie said:

Its a really simple job, just make sure soldering is good and shrink wrap the lot

Click to expand...