Clutch Slave Location? 2022 GT

[lotus]

Just bought a used 2022 GT with 23K miles and changing the fluids. Done the brakes and now wanting to flush the clutch circuit. Trying to locate the slave without taking it apart.
Manual is no help and did a search on YouTube and the forum without success. Probably not trying hard enough.
Could somebody please tell me where it's located. Certain it's up front around the oil filter, but would like to know if I can get to the bleeder
screw without disconnecting the shrouds, etc.

Thanks,
Larry

 

[R-III-R Turbo]

I don't have a 3 but it has to be on the front centre of the clutch cover on the front of the engine, looks like behind and between the oil and coolant rads, moreso the oil rad.

 

[Journeyman]

It's a PIA to get there and is part of the 20K service, which you should do while in there. Triumph will charge $2k dollars + for that service, or you can do it yourself with time and patience. Here's what I did. I was unable to find any information on YouTube, etc. and the user manual has some holes in it. I hope this might help....

A look at the 2.5 Innards - DIY 20K mile service, including valve clearance check and shim replacement

Part 1 This includes valve clearance check and shim replacement. Also air, fuel, spark plug and coolant replacement, and bleeding the clutch. This is a work in progress, so edits and further information to come... Get the service manual here...

www.r3owners.net