Bone stock Dyno

[Boudreaux]

Here is my 2014 roadster bone stock dyno sheet. 123.70hp 143.79tq. Dont like the it drops right after 5000rpms. numbers look good for stock though. All thoughts,suggestion and comments welcome!!!

 

[TasRocketRider]

No expert, looks like stock. Answer is air in and out - airbox removal and new pipes are the low hanging gains. Should add another 40 bhp. Have fun.

 

[steve59]

I'm surprised that power starts rolling off around 3200 rpm, but hwy riding supports the numbers at least on my bike she just feels so sweet at 3-3200 rpm. I only managed 4000 miles this summer and never felt the need to upgrade the motor, rear shocks, passenger seat, and EB kit are another story.

 

[teraeric]

hmmm... i guess those numbers are about what's advertised at the crankshaft... i was going to dyno my '12 r3r at biketoberfest, but ended up having to work the whole %#$@# time... maybe now i don't have to...

 

[R3R Torque]

Boudreaux,
That's the first dyno I've seen from a stock R3R. Thanks for posting it.

The rapid power drop at 5200 may be cause it hit the speed limiter.
Just a thought...

 

[dougl]

Unless they changed it the rev limit is 6300. They have closed the secondaries at the high end. That's why the HP and torque drop off at 5300. With the secondaries 100% open, the torque wouldn't drop off and the hp would increase.

 

[R3R Torque]

Unless they changed it the rev limit is 6300. They have closed the secondaries at the high end. That's why the HP and torque drop off at 5300. With the secondaries 100% open, the torque wouldn't drop off and the hp would increase.

I was thinking more along the lines of the speed limter - in mph. The stock limiter is supposed to be set around 125mph, though mine seems to kick in at 115. The sudden power drop could be if the speed limter / governor was hit during the dyno run.
Again, just a thought.

 

[TasRocketRider]

I was thinking more along the lines of the speed limter - in mph. The stock limiter is supposed to be set around 125mph, though mine seems to kick in at 115. The sudden power drop could be if the speed limter / governor was hit during the dyno run.
Again, just a thought.

My thought is Doug is on the money.

 

[dougl]

Most dyno runs are in 4th and they drop off at the red line.

 

[V8villan]

Here is my 2014 roadster bone stock dyno sheet. 123.70hp 143.79tq. Dont like the it drops right after 5000rpms. numbers look good for stock though. All thoughts,suggestion and comments welcome!!!

R3R 2014 model Bhp and Torque figures | R3Owners

Hi buddy, here's a link to my dyno run thread from a week ago. It's a 2014 RR with TOR's and remap. Black with white stripes... No more need be said...

A few interesting comments to look at on this thread as well as my numbers

Hope it's of help

Cheers

Vv