Auto tuner for '08 Rocket?

[Buzzz]

Hi guys,

Does anyone know if they make an auto tuner for the 08 models? I've seen the PC3 but I like the idea of the auto programmer.

Thanks,
Buzz

 

[Kmutt]

PCV (thats a 5 not v) with the added Auto Tune option......many on here have it and so far lots of positives
And yes it will work with your '08 even though when you search Dynojets website it will only give you the PCIII option.......many have also put this on pre '09 bikes

Good Luck!

mutt

 

[muleskinner]

I can't believe Dynojet still lists the PC3 for an 08! It was the 08 they used for a test mule for the PCV!

 

[Buzzz]

I was told by the Triumph dealer yesterday that the sensor that goes in the o2 port on the PCV is 14mm and the old sensor is 12mm, but they can drill and tap for the new size. I just wanted to make sure from you guys that all the connections will work on the '08. I trust everyone here way more than the dealer.

 

[Pedro]

my 04 is 18mm if that helps sorry

 

[muleskinner]

Your dealer is giving you incorrect information!

The factory O2 sensor bung in the Rocket is M18X1.5mm and will use the new wide band sensor from Dynojet just fine. If your dealer is giving you this kind of misinformation, you might want to go elsewhere for your installation before it becomes a nightmare!

The new Harleys since 2009 use the small narrow band M12X1.5mm sensor and have to be drilled out and replaced with the bung supplied from Dynojet as do some of the metrics.

 

[Buzzz]

So, when I place the order for the PC-5 with the auto tune module, should I tell them it is for the 2009 R3 Classic even though my bike is the 2008 model?

 

[Evil Mitch]

So, when I place the order for the PC-5 with the auto tune module, should I tell them it is for the 2009 R3 Classic even though my bike is the 2008 model?

correct otherwise they will direct u to pcIII
the pcv is perfectly compatable with your bike

 

[muleskinner]

correct otherwise they will direct u to pcIII
the pcv is perfectly compatable with your bike

Yep. Take a look at the Dynojet site. I believe it lists one PCV P/N and A/T unit for 08 and up Rockets. Could be wrong, I guess I could look at the site, but it's too early in the morning for me!

 

[muleskinner]

Also Buzz, I want to add I could be wrong on the O2 sensor bung size, but my 011 is 18MM and I don't believe Triumph has changed the size. But others here might be able to clarify that.