Anyone tried XB Extremeblasters?

Hov

Flibbledobsdad
Joined
Dec 21, 2015
Messages
26
Location
Sussex, England
Ride
Rocket III Classic 2007
Triumph Rocket 3 exhaust XB Extremeblaster tunable pipe slip on to header

They look quite tidy, not too expensive and light weight. I want to know what they are like if set up not to be too loud. Anyone tried them?
 
Triumph Rocket 3 exhaust XB Extremeblaster tunable pipe slip on to header

They look quite tidy, not too expensive and light weight. I want to know what they are like if set up not to be too loud. Anyone tried them?


Video is 240p, so the sound quality is sort of trash. Seems pretty loud. I'd imagine it would cut a lot of weight from the stock double cans. If you pick up one, let me know how you like it.

Edit:

Description from YT Video:

Custom made to fit in the USA. XB08 Extremeblaster all polished stainless steel construction slip on shorty glass pack with 4" tunable disk system fitting Triumph Rocket 3 stock header. This owner installed a muffler bracket to the stock frame mount however is not needed. Also wrapped the header pipe also not needed. Everything included for complete installation. Small mid-pipe also available to tilt up pipe a bit. Available in XB open pipe configuration as well.
XB08 incorporates high efficiency disk technology producing a clean burning exhaust with better low end torque, response and top end horsepower with the same or better fuel economy over the stock design. No additional fuel needed from a fuel controller to compensate for cat exhaust chamber removal and no popping on deceleration like other open pipe models. This is a tuned exhaust system with a careful balance of low end torque and top end power delivery. Disk pipe delivers deep tone that is not excessively loud like most short aftermarket pipes. Remove plates to tone down exhaust note and achieve added torque and response.
 
Last edited:
you do know that is a super trapp muffler you can get for about 100 with a bracket bolted on it
Not something I had come across on this side of the pond, but now I know about them I will start noticing them everywhere! For 100 I will give them a try.
 
Hov,if you can get these for £100 in the UK please let us know where.Cheers.
 
Hov,if you can get these for £100 in the UK please let us know where.Cheers.
I'm hoping if they are $100 it should be possible to get one sent over, pay import duty and end up around £100 (=$160). Will let you know if I manage that!
 
I'm looking at a minimalist exhaust project also, however the supertrapp stubby is round and couples directly onto manifold drop down pipe with standard 2 inch diameter hole. there is not sufficient clearance between manifold downpipe and ABS box for round exhaust fitted directly to manifold. unless its been mangled so it fits maybe ? you wouldnt want the exhaust physically touching other parts. I like that stripped back sh-it kicker look
 
Back
Top