Hello, new here.
Just got i believe a previous members bike here after searching lol. Anyways it is a 2011 r3 roadster with 3to1 viking and ramiair. On start up it really doesn't like cold starts and almost stalls out a few times until warm. While riding the headers seem extremely hot, I know there is no heat shield but still I could loose all my leg hair under my jeans lol. On Deceleration a lot of popping happening when throttle is off.
Anyone have a tune you would suggest for this bike and mods? Thanks any suggestions welcome. It was already tuned at a dyno from previous owner, but honestly I feel the person doing the tune didn't know what they were doing.
Thanks
20355 Baseline Dyno Tune 2011 - Thanks Martin_Brighton_Uk Pod Filters, Staintune Mufflers and Crossover Balanced F and L tables Decel pop added Modified AFR throughout the range. You must - repeat must reset your TPS and ISCV as per my notes...
As you say the tune is way off, ulimately you would have the bike set up on a Dyno my a competent "Tuner"
It should not be running that hot when riding.
I feel plenty of heat off the pipe but I expected that but my bike does not have a decel pop. Find an experienced tuner with a dyno and have it evaluated.
As you say the tune is way off, ulimately you would have the bike set up on a Dyno my a competent "Tuner"
It should not be running that hot when riding.
20355 Baseline Dyno Tune 2011 - Thanks Martin_Brighton_Uk Pod Filters, Staintune Mufflers and Crossover Balanced F and L tables Decel pop added Modified AFR throughout the range. You must - repeat must reset your TPS and ISCV as per my notes...
2011 Roadster Ramair TORs and Viking crossover. You will need TuneECU to use that tune to tweak the TPS & ISCV. You must read the notes included with the tune.
2011 Roadster Ramair TORs and Viking crossover. You will need TuneECU to use that tune to tweak the TPS & ISCV. You must read the notes included with the tune.