'06 Classic Heel/Toe Shifter to just Toe Shifter

cdlamph said:
Hey barbagris, If you get a chance and can find a pic of your set-up then I'd appreciate it, thanks
Click to expand...


I have since made a MUCH better linkage rod with proper rose-joints

And here is a comparison of Tarrozi - heel-toe and standard levers.


Note the heel-toe and Tarozzi share the same pivot diameter (luck) - the simple lever is different.
 
geno said:
Would you or anyone, know if this type of heel toe shifters will fit my 2005 R3, I for one like this type of shifter; Thanks big guy and "Be Safe!
Click to expand...
Getting the Triumph one to fit would be a challenge - The dimensions are all different.
 
barbagris said:


I have since made a MUCH better linkage rod with proper rose-joints

And here is a comparison of Tarrozi - heel-toe and standard levers.


Note the heel-toe and Tarozzi share the same pivot diameter (luck) - the simple lever is different.
Click to expand...
Nice, that looks like something I might be able to do if I can't replace the floorboards and all. Thanks for the pics.
 
barbagris said:
Are those Classic boards? - or the higher footboards?
Click to expand...

They are the Standard boards, which are higher and provide more ground clearance.
I do have a new heel/toe shifter that came with it. Supposedly it is very rare.
 
1olbull said:
They are the Standard boards, which are higher and provide more ground clearance.
I do have a new heel/toe shifter that came with it. Supposedly it is very rare.
Click to expand...
Thought it best to ask - point out that with Classic boards the "bul" lever conversion lever will sit higher above the board.
 
barbagris, Do you remember what size rose joints you used? The only info from Google searching ended up from a HD forum.
 
Just bog standard M6 rose joints - I walked into a bearing supply place and said - "Rose Joints - 6mm" - In the US I believe they all called HEIM JOINTS



Mine are similar but the threaded part is "female" M6 ISO-C thread - Diameter "C" 6mm
 
barbagris said:
Just bog standard M6 rose joints - I walked into a bearing supply place and said - "Rose Joints - 6mm" - In the US I believe they all called HEIM JOINTS



Mine are similar but the threaded part is "female" M6 ISO-C thread - Diameter "C" 6mm
Click to expand...
Very Cool. I can find the Heim Joints, thanks for that. The problem I have now is locating a connecting rod with LH/RH ends, might have to make one myself.
 
cdlamph said:
Very Cool. I can find the Heim Joints, thanks for that. The problem I have now is locating a connecting rod with LH/RH ends, might have to make one myself.
Click to expand...
I didn't bother. I got two normal thread joints and made a rod with some bar.
A 6mm has a 1.0 mm pitch - Half a turn is only 0.5mm - Ok you need to whip it off to adjust - but it's not a game changer.
 
You must log in or register to reply here.

Similar threads

Heel toe shifter
Replies
4
Views
543
Dr.D
07 classic
Replies
2
Views
175
1olbull
07 classic
Replies
0
Views
82
TURBO200R4
High Idle on 05 Classic
3 4 5
Replies
41
Views
2K
TURBO200R4
No Power To Anything
Replies
7
Views
157
kipper
Menu
Log in
Register