05 Rocket 3.

[praxiboi]

Hey y'all.

I'm new to the Triumph market and I've left behind a 2012 Road Glide FLTRX, 02 Intruder LC1500, 19 Sportster, and a 1980 CB650.
I got my rocket 3 for 3500 bucks, drove it home 200 miles from the guy I got it from.

I recently had my speedometer burn out on me so I've been scrambling to correct that issue.
If anyone has any recommendations on what to replace it with, let me know. I have seen many posts by Decosse and the thread on R&D but it looks like that thread died out without any significant final results on adaptability of harness to speedos.

Anyways, if you're selling an 05 speedo and tach, let me know!

 

[TURBO200R4]

Welcome from Tucson Arizona

 

[MIG]

WELCOME! to our R3 Family.... Any photo's of your new Ride (and older ones??) I know you'll get the kinks worked out and be fully enjoying your new Perma-Grin in no time...
-MIG

 

[Jallen3.14]

Welcome! My last bike was a 1500LC. I loved that bike. Still have one, but the transmission is shot.

 

[sleeves]

Welcome from NZ. 05 gauges with the horizon line are hard to comeby you can go later or aftermarket though.

 

[praxiboi]

Welcome from NZ. 05 gauges with the horizon line are hard to comeby you can go later or aftermarket though.

What do you mean later? I can use like an 08 or something without the horizon line?

 

[praxiboi]

WELCOME! to our R3 Family.... Any photo's of your new Ride (and older ones??) I know you'll get the kinks worked out and be fully enjoying your new Perma-Grin in no time...
-MIG

Here's the rocket, my old VL1500, my 19 sporty, and my 12 RG (custom paint, please. )

 

[atomsplitter]

Greetings from sunny North Texas. The speedo is only going to be available used so eBay and salvage yards are your best bet. The part number is T2501230.

 

[sleeves]

What do you mean later? I can use like an 08 or something without the horizon line?

Sry. I mean later model guages. The earlier bikes had a two colour backplate on the gauges. If you do one it looks weird. I also think there's a change point where the gauges are not compatible but I am not 100perc certain on that. Maybe the change in ICU? Others here will know for sure.

 

[Mike188]

Welcome to the forums, from South Australia