Have a 2016 Roadster, with DPlatt crossover and matching mufflers. Just added a ramair last week also. So, I downloaded Hanso's tune 20776 3rd generation, unrestricted, 2014+ Roadster TORS, triple filter/ Ramair etc. and loaded to the ECU without issue. I did noticed on this tune the O2 sensor...
Hi,
Got the above going on and loaded a tune that seems to work well with this combo. Just wanted to confirm as I am new to Tune ECU does this show that the secondaries are open 100%?
Thanks
I have the map 20228.
It’s a bit rich, i smell the fuel...
I try to put map 20226. But no luck with the connection...
Less octane in fuel will help?
Thanks
Francis
Been having issue with sluggish throttle response and a slight stall 2nd 4 the gear area when I slowly open the throttle. Anyway, this morning I was playing around with tune ECU on my phone via Bluetooth connection and decided to clear some codes. With the bike at idle I hit the clear ECU codes...
Looking for a new map for my 2010 r3t with d&d slip ons and k&n filter. I just ordered the cable with disc but I'll use the android app. Looking forward to detouring the engine.
I just spoke with Rob's Dyno in Gardner mass and while he has tuned R3's he has some concerns about changes Triumph made after 2013.5.
He's more than willing to tune R3's and would be a great resource for us guys in the northeast if we can get over this hump.
His concerns are:
There are...
Hi everyone, looking for the best map that suits my current setup. I have a 2008 rocket classic, cat delete, O2 delete, shortie exhaust system and ramair conversion. Does anyone have a good map for me? The bike splutters if I try hold 3000rpm in every gear. It's fine below and above. Figure it's...
Hi all,
been reading up on Tune ECU as Im looking to retune my stock touring model to get the extra power that one will apparently get. I will do exhaust and ramair done the track, this is just step one.
I notice the instructions say hook battery up to another battery and others have said a...
I'm doing the upgrade with Lush and Bryant parts and i need to buy a real Tune ECU cable. I have seen that there are poor performing knock-offs and I don't want to buy a problem. Where is a good place to buy in the US? I saw one member selling but it was exclusive to the UK.
Do I have to find...
Just got the driver for the OBD cable sorted and connected to tune ecu and did a tps check and all fine then did iscv reset and all good but when I disconnected turned ignition on the fuel gauge showed full tank and 210 miles range!!will this recalibrate when i ride it?
Hi, Okay I have bought a OBD-2 USB cable from TTP and was wondering what driver I will need when using Tune Ecu, do I use the one they supply with cable, just want to double check?
I have offered to help out a fellow Captain in the area with his 2007 Rocket. It sounds like the bike is running very lean. Red hot lean.
It appears to be stock, but I will go over it when he comes up this next week.
I need a recommendation on a good tune for this model.
Thanks
Ey up people.... been out on the rocket today and have noticed it sort of backfires on the odd occasion on the left hand side..not sure if its exhaust or into standard air intake.. my set up is totally standard apart from cat bypass.. oh and its a 2008 classic with the 3 pipe set up.. I have...
Rick C has asked me to give him a hand with his tune. I think he only wants me for my cable, but anyway. The bike is stock as far as intake and exhaust.
I will check tune ecu and see what they have listed.
I believe we are working on balancing the mileage and performance.
In case you missed this gem, @GreasyGeorge , a new forum member had his bike dyno tuned in Gardner, Mass, directly to the ECU. So now you have no excuse to trip out to the west coast for a tune:oops:
here what was said:
George, welcome from Maine. Where did you get your bike dyno'd? PCV or...
I just ran tune ecu for the first time and I found out I have map 10222. My bike is a 2009 standard R3 with cats removed and after market pipe. I also have a K&N air filter. Looking at the tune ecu site it looks like I need either the 10226 or 10228, both say they are for aftermarket pipe...
I found this TuneECU tutorial and its really well done. Its using a Triumph Tiger 800 but the process from installing the Tune ECU software ,loading the drivers for the cable and the demonstration of the actual process of using Tune ECU to download your Hanso tune (or any other) is excellent...
Hi guys n gals!
Right have been doing a bit of reading on here regarding tunes etc... while I don't have the max horsepower addiction yet, I would like to get what I can out of mine at the mo with what I have. So all I have at the mo is cat delete pipe with stock air filter n stock mufflers...