Hey guys,
Looking to remove the OEM exhaust from a 2022 rocket 3 GT. I haven't found any past posts or threads about this so I'm wondering if anyone knows best place to find this info?
I bought this with the intention of fitting over the winter but have now sold the bike.
Really nice kit, all CNCd from billet with all fasteners & plug included.
£40 + postage
It sure sounds like a hassle. Can the tank be partially lifted to gain access to the spark plugs? I thing these engineers design so most buyers have the dealer perform work at $95 an hour.
Hey guys,
I have searched here, online in general, and posted in the R3 Facebook groups, so now I have to start a thread. I'm replacing the seat release cable on my '11 R3R. The nib at the end is broken off, so I can't use the key to remove the seat. I tried today to find another way in, but...
My 2022 R3 GT 221 was delivered with a lot of unnecessary safety stickers plastered all over it. To remove easily, first spray with a little WD40 and let sit for 30-seconds, then heat with a hair blow dryer for 30-seconds, peel and clean. I left the specification stickers on the tank because...
IAW the maintenance manual, it says to remove the front forks to slide off the turn indicator bracket clamps Seems like a lot of work for a simple plastic clamp. Has anyone successfully removed the clamps without removing the forks (stretch the clamps open)?
Hi all,
We are in the process of removing the engine front cover and have a question on the removal of the wayer pump chrome tube.
We removed the bolt - does it just pull out or do we have to remove the nut from the other side of the engine??
It may have an O-Ring and just being stubborn but...
Good Evening friends ,
Hope you are safe and well . I am new to this forum and having purchased a rocket 3 touring (14) a few months ago , I find myself with a dead battery . I have been unable to ride because of the winter . I am trying to remove the seat to be able to trickle charge it . I...
Any GT owners removed the backrest assembly yet? I removed the 2 hex bolts under the seat but that didn't free it up. Looks like it may slide forward but I didn't want to use to much force if that isn't the case and nothing in manual about removal. Thanks.
I need to put a filter on the crankcase breather, but I can't even get my hands in there. So I'm trying to remove the airbox for access. After unbolting, the manual says to "manoeuvre" the airbox out of the frame. I'm trying to pull it from the right side, but it's very stubborn. Especially...
Good morning all,
I typed out a huge walkthrough guide on how to remove and replace the wheels on my 2015 Rocket 3 Roadster last year, but since it was my first time, and I had zero idea what I was doing, I didn't video my steps. Sadly, my Avon Cobra rear tire picked up a nail at only about...
Hey gang,
Quick question for the team. How does one remove the rear brake light lens on a 11 R3T? Do I have to unbolt the whole assembly from under the fender or does the lens pop off? The lens doesn't seem to have any play so I am guessing I have to unbolt it.
Thank you,
Paul.
Hi all anyone got any ideas on getting the pistons out of my front brake assembly? i don't have access to compressed air to push em out. thought about soaking with inox overnight to get them out.
also does anyone have the triumph code for the front brake seal kit?
cheers
Hi Guys, I want to remove my tank on my r3t. I did do a search, but I'm asking about a "banjo washer on the fuel line"? Should I have a new ready for when I put the tank back on?
Also, I looked in the service manual for directions to do this, and they were talking about pressure testing the...
Hi all, i am just wondering if anyone has removed the thermostat without taking the oil tank off? if so, it would be great to get any tips!
08 Touring.