pcv

So, I wanted to have my bike dyno'd so I had a Power Commander V installed. The A/F ratio has now been optimized for my mods and I'm going to load the PCV map into TuneECU so I can remove the PCV from the system. Is there anything specific that I need to know about removing it? I'll probably...

Hi all, not to start another thread dealing with a Power Commander but I couldn't find what I was looking for in the existing Threads...I did NOT read them all. I talked to a dealer about mods for my Rocket, and asked them what they do. I am looking to do the intake and exhaust, secondaries...

Any one interested in purchasing a PCV , make an offer Australia only please .

I recently fabricated a forward facing forced air filter box for the side of the r3. I got the bike used and the previous owner had his own target afr/tune going on that worked just fine until after the install. His tune was from 13.0-13.7 with various rpms obviously. Test rode it today without...

Ok.. so fitted a PCV and autotune today.., bike sounds great, much better than before although ive not ridden it yet.. BIG THANKS to Hans0 for all his help, advise and maps... 2 small issues... I fitted the new O2 sensor that came with the auto tune.. but now I have an ecu fault code, "P0031...

Hi all, just looking for some confirmation with this and please correct me if I'm completely wrong here (its a bit long winded but trying to get my head around this). The standard computer has F and L Tables with an FL Switch based on throttle position and RPM. These determine the air mass...

Here is the second part

I have been doing a bit of research on this setup prior to dropping the hammer on it myself. There was some threads back awhile where there were discussions about changing the F-L switch values with Tune ECU to much lower values than they originally were. Also there was some discussion of...

My surrogate son has a GSXR600 track bike, hotted up with Yoshimura exhaust, cams and K&N. It also had a PCV fitted to it. The bike was lacking compared to others. On a thought (probably a bad one) I took the Auto tune off my R3 and fitted it up to his bike (there was a connection for it in...

I'm selling my 2014 Roadster. Still has about 10 moths left on warranty. Only 2206 mi. as of today. I have invested lots of money on Fly screen, back rest/luggage rack, Carpenter new style exhuast, Kerker 2 1/2" comp baffle, PCV, Auto tune, Ramair filter system, J W Speaker Daymaker headlights...

Ok, I am new to the Rocket world and trying to figure out what all of these acronym's stand for. I am putting a Vance & Hines 4" Pro Pipe slip on from a Harley, (it sounds real good) and they make good power on Harley's and it is great looking pipe. I took all the exhaust off and will be...

Hello, Im nabbing a PCV today, ive done the ramair upgrade, wondering is anyone else has similar bike with stock pipes and has a map for this? Thanks much.

Hi All Just getting my bike back together after a bit of a rebuild. Been running triple K&N's, Sec's removed, D&D exhaust. I am OK messing round with Tune ECU and apart from poor fuel economy (re another recent post) I have been happy with it. I have recently fitted a PVC with an AT200...

Hi I am looking for a PCV must be in very good condition and maybe an auto tune if it's near new. Cheers Pete

After 5000km I decided to accept the trim values. During the first ride since accepting the trim values, a 1500km ride, I experienced some strange issues. When accelerating slightly after cruising, when passing another vehicle, the motor would hesitate or stumble badly, to fix the problem I...

Just pulled it off the 2011 R3R. $250 + shipping Works great, just changed out to the Dobecks AFR+.

Does anybody KNOW what a PCV (with and/or without Autotune) does regarding modifying fuelling in "N" if one uses the tune per gear mode? I already have a suspicion.

PCV and Auto tune and a Cable one of the better quality ones to load the tunes up to your bike, Brand new never even been out of the box. $500 posted registered anywhere in AUS

As some of you know I am anxiously awaiting the arrival of my new exhaust system from CES for my 2013 Roadster. I am currently running Hanso's 1st (I think) PCV map. Is there anyone out there with a similar set up that has a map you like? As soon as I can find a tuner I can trust the bike will...

Hi guys some of you are already using my version 1 or the better version 2 while Version 2 is great and I will still probably keep using it while touring as it has a great mix of decent fuel economy and power. I decided to develop it a bit more as a fun / power map so here it is I have only been...