During the 2020 West RAA, I noticed it was hard to see the rear turn signals on the older incandescent Rockets, especially in the day time. The new Rocket LED turn signals 'pop' and it's easy to tell if the rider is going to turn. So I decided to upgrade my 2014 R3R rear turn signals on the...
Hi Everyone
Couple of questions, can you get heated seats because the wife was use to this on the Explorer and what LED headlights are people using?
Cheers👍🏼
A proper indicator LED conversion.
This is just the idea and concept. I did this for my 2009 and I did make two other unfinished sets which went to Roadster owners. But I don't honestly know if they were ever fitted.
Really it's not hard to do, but you need some basic soldering and wiring...
Switched out my indicators/ turn signals to clear lenses and wanted a brighter LED bulb which was not orange/ amber behind the clear lens. Bought a pair of these from Amazon as a test and tried in the rear indicators. Not only are they significantly brighter, but the fill out the entire...
Anyone use this? I like the fact you don't have to cut anything, my only concern is going from three pin to two pin....does it matter?
LED Turn Signal Flasher Relay for Triumph Rocket III Roadster and Classic Models (on Amazon)
I’ve bought some like this and they fit the touring models and have worked flawless. You need to add resistors for led flashers but they are otherwise plug and play I believe as the housings are the same size Harley uses. Just thought I would post in case someone is looking for something like...
Currently I have LED headlights which draw 90W (45Wx2) and Rigid LED spot lights that draw 94W (47x2). I am thinking of adding a LED light bar. What's the max wattage I can add?. Will a 310W light kill the battery ?:( . I will be using dedicated switch, relay and fuse for the light bar. All the...
I bought a 7" LED headlight for the 2008 R3T. It will plug right in and seems to work fine. But it came with what looks like an adapter or relay that has LED/CANBUS stamped on it. Do I need to use this as well?
Hey guy's,
Will be adding smoked turn signal lenses to 2012 Roadster and LED signal bulbs.
Looking for correct flasher relay that connects under the cover on the right side of bike.
Found a few but you hear about having to switch the wires around on the relay and such.
Whether it's two or three...
Was wondering if the Rocket 3 TFC headlights would fit our buckets - seems the Bobber ones do, and appear the same as the TFC ones
Thanks to Stephen cotter for being the Guinea pig
Triumph part number A9830104
But at $620...... each.......
Triumph Motorcycles | Part Search |...
Hi y'all just wanted to update you guys and gals that when switching over to LED brake lamps from OEM, the converter thing that they say is required to trick the ECU that more voltage is there when it's not in order to have it function properly is not actually required. I apologise I don't know...
Hi y'all. Looking to.brighten up the indicators to LED. When ordering it's asking if I want CAN Bus LED Bulb
Or regular LED bulbs
Which one does the rocket T take? Mine is a 2013. Thanks
Hi to all,
I have LED rear light and am planning on switching headlight to LED.
Will this require another relay or anything else I'm missing?
Many thanks in advance
I'd like to add some LED strips but wondering where power connection would be? I would like them to switch on with main power applied.
Any help greatley appreciated.
.... I stumbled across these the other day.
There are loads all over Alibaba and Amazon. 3 inch body. So tidy sized.
I would normally leap and order a set for the purposes of R&D but I am in a temporary moment of caution.
This has depleted my wallet this month.
The wires that need to have the resistor spliced in between the two wires can be accessed through the right side panel. They are the two with the white connectors. I used solder, shrink tubing and electrical tape.
I have an 07 Classic Touring that has the snow cone signal lenses. I thought I did plenty of research here for installing the Custom Dynamics LED clusters, but I guess not. Custom Dynamic part# GEN-18-AR2-1156 for the rear and GEN-8-AW-HW for front. Measured the housing which was good but didn’t...