I am going to try the suggestions about vibration in my handle bars, and install some bar end weights. My inside caliper is broken . Does anyone know the ID. Plus any recomendations on where to get a good set that will knock down the vibrations???
Trying to get enough info to order a handlebar snake for vibration. Need the handlebar ID.
Also, do they (Factory) run any wires inside the handlebars, or are they all outside?
Thanks Russ
I noticed the handlebar vibration, not too long after I got the bike. In the past, with other bikes, I have used "Buddy Grips" which have done a pretty good job of reducing the vibs by maybe 90%. Not so here. Although better my hands still will go numb. I also wear gloves with gel padding...
I have been shearching the internet for a set of the Revco handlebar risers or other suitible substitutes. I'm 5' 10" and have noticed the long reach. Any suggestions appriciated.
I'm looking into getting different handlebars for my 2011 Roadster and was wondering what advice/warnings people might have. I've installed different handlebars on my Harley before, but wanted to check if there were additional concerns or headaches to be aware of since in general there aren't...
I'm looking into having blocks like these made for my '15 R3R. If I were to have them made and have several extras, would anyone be interested? These are from an HD. I'll have mine made to fit the curve and bolt position perfectly. They will NOT be chromed, just milled aluminum.
Let me know so...
Im changing out my stock
bars for a set of T bars. I've never been comfortable with the stock bars position and I love the feel and look of my new bars. Question for those that have changed out bars. Do you have to drill out holes for the locator pins or did you just file the pins down...
Finally got around to installing a handlebar from a Valkyrie on my ‘13 Touring. World of difference for my moderate sub-6 foot stature. The bar is about 1” narrower on each side so it doesn’t pull away from my grip in slow speed turns. Road a couple hundred miles today on curvy mountain roads...
Got my T bars in yesterday and started swapping everything out. Got everything mounted on the right but when I putting the left side on I noticed the turn signal switch all of a sudden hanging up and clicking. I looked in the service manual and couldnt find anything on it. So I started taking it...
Can anyone tell me if there is actually any difference between the OEM Classic bars and the OEM Roadster bars? If not, I am going to have to go down the aftermarket route. Reading the forum it seems to be a common complaint that the bar shapes are uncomfortable on the old wrists!:(
I know its a mundane question but looking to update my grips. I measure the outside diameter of my stock bars and it says 1" , When I go to a site like JP Cycles it keeps calling for 7/8 for my 2013 roadster. Does the bars taper down to something else or do they have it wrong? Don't want to...
I would like some input in handlebar selection.
I have a completely standard 2010 Roadster.
When riding after about 45 mins my hands go a little numb, thumb and pinky first, then most of my fingers.
I am thinking of trying some alternative bars but am not sure what to look for.
I realize ones...
This system was installed on my bike when I bought it last fall. I uninstalled it over the winter, as I'm a helmet guy and listen to music, etc on in-helmet speakers.
I tested this out when I first got the bike and they are the best motorcycle speakers I've ever heard. Super powerful, super...