Hi all I’m advised that if I try and change the tune on 2018 rocket then the ecu will lockup and will need to be sent back to the Uk to be unlocked. I want to fit my new pipes but hesitant until I get this risk sorted. Any ideas?
I am hoping someone on here could help me. Until recently I have been using Tuneecu to map my bike after mods. But with the latest mod i am still running hot and decal popping heaps. So i bought a power commander 5 that fits my bike (no auto tune) and planning on getting it custom dyno tuned in...
How are you guys installing a 3 bar map sensor for Pcv and Tunecu for boost applications?
I read this post from a while back. It explains how to setup a 1 bar map for pressure base tuning. but not much about 3 bar.
How To: Add Pressure Input for PC-V
A mildly interesting fact that the TPS/ISCV voltages read differently in Triumph's own diagnostics software, versus in the TuneECU and TuneBoy we all know and use.
TuneECU and TuneBoy appear to read 0.02v or more higher on the TPS/ISCV than Triumph's own diagnostic software.
Would this be the...
My local dyno tuner does not use tune-ECU, so my only option is to have them install a PC-V since that is the platform they work on.
I currently am running Nels Touring Tune, and have been pleased, but really would like to dial in the performance and see some hard numbers.
Before I pull the...
Hi,
Got the above going on and loaded a tune that seems to work well with this combo. Just wanted to confirm as I am new to Tune ECU does this show that the secondaries are open 100%?
Thanks
So the new to me Rocket has Jardine pipes and a K&N filter under the seat. Checking underneath the right side cover it still has the original Keihin ECU.
There's quite a decent amount of popping on decel, and I was wondering if this means that the bike was never properly tuned for the increase...
I have the map 20228.
It’s a bit rich, i smell the fuel...
I try to put map 20226. But no luck with the connection...
Less octane in fuel will help?
Thanks
Francis
Been having issue with sluggish throttle response and a slight stall 2nd 4 the gear area when I slowly open the throttle. Anyway, this morning I was playing around with tune ECU on my phone via Bluetooth connection and decided to clear some codes. With the bike at idle I hit the clear ECU codes...
I just spoke with Rob's Dyno in Gardner mass and while he has tuned R3's he has some concerns about changes Triumph made after 2013.5.
He's more than willing to tune R3's and would be a great resource for us guys in the northeast if we can get over this hump.
His concerns are:
There are...
Hi everyone, looking for the best map that suits my current setup. I have a 2008 rocket classic, cat delete, O2 delete, shortie exhaust system and ramair conversion. Does anyone have a good map for me? The bike splutters if I try hold 3000rpm in every gear. It's fine below and above. Figure it's...
Hi all,
been reading up on Tune ECU as Im looking to retune my stock touring model to get the extra power that one will apparently get. I will do exhaust and ramair done the track, this is just step one.
I notice the instructions say hook battery up to another battery and others have said a...
Due to numerous requests for an older version of TuneECU than 2.5.8 etc, I've posted this up on my Google Drive for download.
Zip file includes the cable drivers that were current at the time of 2.5.5 (around 2012).
DOWNLOAD LINK
Hi everyone, I have an issue with the left clock on my 2008 rocket classic. It's the 1 with the Speedo. When I start the bike the clock lights up engine management light stays on oil light stays on and the LCD display shows 888888. Anyone seen this before or know how to fix it. I plugged my...
Has anyone had problems like this after a similar effort?
My mechanic installed the TTS-Performance stage 1 supercharger kit in my 2017 Rocket III roadster. We used TuneECU to load a map file supplied by TTS-Performance into the bike. The bike initially would not start. The engine would...
I'm doing the upgrade with Lush and Bryant parts and i need to buy a real Tune ECU cable. I have seen that there are poor performing knock-offs and I don't want to buy a problem. Where is a good place to buy in the US? I saw one member selling but it was exclusive to the UK.
Do I have to find...
Just got the driver for the OBD cable sorted and connected to tune ecu and did a tps check and all fine then did iscv reset and all good but when I disconnected turned ignition on the fuel gauge showed full tank and 210 miles range!!will this recalibrate when i ride it?
Hi, Okay I have bought a OBD-2 USB cable from TTP and was wondering what driver I will need when using Tune Ecu, do I use the one they supply with cable, just want to double check?