Ended up ordering a pair of these engine dresser bars from AliExpress and was totally disappointed. The holes don’t line up.
Any ideas as to what can be done? AliExpress closes the return window within 48 hours and unfortunately I wasn’t able to try these on to the bike in that time.
I don’t...
Howdy peeps
Im after chrome rear dresser bars for a 2008 R3 Classic. They are a discontinued item so all the sites that
I have seen that list the part dont actually have them. So this will be a case of someone out there who have them
collecting dust in there cave and would like to unload them...
i got a set of dressers from EMP Motor Parts 2nd hand and got the rear ones on but i see for the front ones on the header side there is a bolt and on the clutch side there is a cover over the nut. is it easy to get this off or am i going to have to remove the clutch cable adjuster and possibly...
I picked up a set of Triumph dresser bars from the local dealer, between Christmas and New Years. Finally got around to installing them last night. Using a wheel chock and an ATV jack it was a pretty easy job, at least it was after I realized I needed to strap down the forks so they would stay...
Laid the skunk down last Friday, was lucky enough to get away with just cosmetic damage. The list of stuff I'm currently looking for leads on is as follows:
(08 R3T)
Mirrors
Front dresser bars
Rear dresser bars
Front fender embellisher
Front signal light lenses
Panniers or repairs to...
Should I use a rubber gasket or bicycle innertube piece under the clamp. It seems like just bolting those things right on the chrome bars would surely scratch them up or at least I probably would.
Just getting the bike back on the road after a year (leg surgery), haven't been on here in awhile...
First, what's the deal with price? Bike bandit and a dealer in Miami want $75. Most other places want $250.
Next, I'm putting Tsuyaka strong bags on my '17 Roadster and am curious how far the bars hang back and if they are gonna be in the way of the bags.
Looking at some of those sweet German bars to replace the cheap bendy ones on my 05 but the listing fitment guide starts at 2010. If I got some would I just be sending them back? The cheap ones bent from just the weight of my feet when I had hiway pegs on them.
trying to understand where these mount.
with my recent accident and resulting damage to my Jardine mufflers, i'm interested in protection at the rear end of the bike like my highway bars provided at the front.
pictures of these mounted on a rocket would be appreciated.
thanks!
TRIUMPH ROCKET...
Factory Leather Bags off my 07 Classic. These have the curl on the lids, as you can see in the picture. I got it under control with oil and pressing it into place, but over the course of a couple years it has curled back up again. It actually looks like the lids have overall shrunk a little...
I have some other parts for sale all new never fitted all genuine Triumph and they are the newer stronger type cost $1170 will sell for prices below
Triumph Adjustable Highway arms for the Pegs $100
Triumph Highway Pegs with Logo $100
Triumph Rear Dresser Bars Chrome $250
Triumph Front Dresser...
This is probably very easy but I am nervous about loosening the engine mount bolt to install the bars. Should the motor be supported if the nuts are taken off? Of course I would do one at a time. I know that the torque on the bolt should be 60nm, but what if you are off a little on that. My...
Forget where I bought these, think they are Fehling?
I believe these cost £200 now. Open to offers.
Lost one bracket for fixing, it should be here somewhere, I bought these then never got around to fitting them.
Also have set of rear bars for sale, again never fitted, these were Triumph rear...