cable

Hi all....Someone wanted to see pictures showing the difference between a 1 1/2" longer clutch cable and a 2 1/2" longer clutch cable when swapping out for the Rivco Risers. I just changed mine out using the 2 1/2 ". I suppose 2" might be a compromise. I prefer a little smoother arc...

This is done so seldom one usually forgets how and has to reinvent the wheel. After several bar changes, I have bit the bullet and changed out my bars to a set that required lengthening all my wiring and the control cables. This long-ass adventure has involved many iterations of routing...

As you know, from my other post, I finally got the risers on my bike. On forum advice I got a Barnett clutch cable 1 1/2" longer. I put it on today and while it works, it is at the bare minimum for length and I'm sorry I did not do 2" or 2 1/2". I guess I should have checked a few other posts...

Hello all, My mate sold his bike. So selling it for him. Works fine on Triumph R3 Roadster. $20 USD including shipping. Paypal works the best :) Cheers

Can someone advise me if this cable on eBay will work, in theory anyway, on my 2006 Rocket Classic/Tune ECU: USB cable for Triumph Motorcycles TuneECU FTDI FT232RL Chip OBD II KTM Tune ECU | eBay Thanks!

I have started, downloaded and installed TuneECU. Now the cable, downloaded and saved drivers, disconnected the internet, plugged in the cable but no dialog boxes cam up. Should something have shown on the computer saying I had connected something and where are the drivers? Its Windows 10 as...

Hi anybody know were the wire traces back to..from the block connector on top of the starter motor, had the click going on turns out the connection was mucked up..i checked the recon parts inside i got from the uk last year there still brand new:)

Got an 2006 R3 and the clutch doesn't want to fully disengage when at a stop. It will clank around until I'm at a stop and sometimes it will want to keep going and I'll have to keep the brakes engaged, sometimes it's like it should be. I noticed both the handle adjuster and lower adjuster are...

Hello Friends, It has been a busy week. I am taking off tomorrow September 14th for a 3 day ride in Indiana along the Ohio River. Since I will not be checking in for a few days I thought I would leave you with this. After watching it I am going to subtitle this one my "So" episode.

Where do I send a spare I have?? Mal the Kiwi.

Before I start, I must say I don't think I'm an idiot..... So I'm trying to adjust the throttle cables as per the shop manual. It's not my first time but every single time I go thru the same thing. I adjust the pull cable with free-play of 2-3 mm at the handle. Then tighten the return to 2-3mm...

Well the Ramair and Lonelec Cable arrived today. Ramair: Read the instructions and checked out the YouTube install and read the Forums, looks like an easy enough job. Slow, steady and followed by a 12 Minute Tune. Lonelec and TuneECU: Now this is going to take some serious thought. Was...

Going mad, have bought a new longelec connector cable, downloaded Tune ECU, unzipped the file, downloaded the driver from Dx222.com used driver 2.12.26. Disconnect the wifi and unzipped the file and setup a new folder in C:/ Tune ECU Drivers. My problem is the drivers are not been reconised. i...

Hello, I have searched and read the threads on this, some as recent as last fall. Most of the info is that people have replaced and shared results but there is no detail on where the cable goes. I had some time yesterday and with warmer weather, I took the battery out and started to trace the...

As the title says i'm wondering if anyone in the GTA area has a Lonelec cable that they can rent or loan me, either way works for me. I expect my Autotune to be in by Monday at the latest, ordered from Fortnine and they are pretty quick. I have ordered the Lonelec cable, but don't expect it to...

Just put some T-bars on my bike and want to run the cables up through the bars, is there and cable extension kit available for this?

Well I just broke my 2nd throttle grip. The ones when I bought my bike were the heated grips everyone had issues with so I replaced them with Kuraykan Iso Grips a year ago. Yesterday they broke and left me stranded near Cunningham Falls between towns. Took me 2 hours to get a tow from AMA and...