Adapt adjust overcome
I am lost fellows, this is the reponse I got From Barnett, so where do I find a 4 inch longer brake line. Will all the Thunder Bird cables fit, I see that they are about 3 inches longer, anyway I want to order this stuff, but I will not be home for a month. Does anyone know...
Now that I've had my bike for a few weeks and put a few hundred miles on it I'm starting to notice something I was oblivious to before. When I use the front brake on my '06 Rocket classic I hear a very distinct, "shushhhhhh" sound. It isn't a grinding or squealing sound but not sure it is...
It will be about time this summer to start thinking of flushing the brake lines on two of my bikes.
My 09 Touring has only 6300 miles and has never been serviced other than oil changes; three of them and my sidecar rig with a brake on the car will be a little tricky.
I have one of those...
Hi
Had the annual MOT Test Saturday on the Rocket
( For those not familiar MOT stands for Ministry of Transport a yearly mandatory inspection for road vehicles over 3 years old in the UK )
Not only did I get frost bite riding to the Test station and the bike got Filthy
The bloody thing FAILED...
i have been looking at the different light kits that have the tail light flash when you hit the brakes. For the last three (3) years I have been seeing these at dealerships, rallies and swap meets. The price starts at around $175.00 and goes up to $325.00. Just not willing to dig through the...
Any suggestions on how to extend brake line for higher bars? Does the top line on the ABS junction block remove on the forward side so that the segment of brake line from junction to control can be replaced? If not, how do you extend line?
Last week I went for a blast up the Valley and back for a little bit of stress relief, great ride, no problems.
I got home parked the bike just outside the house and went off and did other stuff.
Came back about an hour later to put the Bike away, just rolled down the hill to the workshop...
In case anybody is interested.
Used one of the universal timers from timers-shop. Program mode 18. Flashes manually input.
Flash 1:2:3:5:7 then off. releasing brake stops flashing and then will start anew if brake reapplied.
YOUTUBE LINK REMOVED - TOSSERS
The indicators have a 10W orange LED...
Post ride inspection showed I will be needing to replace the brake pads on the R3. I am looking for quality not cheap knockoffs. What's the groups input?
I recently did a brake fluid change on my front and rears but then realized there is an extra step needed for ABS (this is my first bike of having ABS brakes). I did a Google search and read that Triumph requires to have some kind of computer program in order to flush out the ABS housing. Does...
I installed the FC-17 forward controils on my '16 roadster -mtheywork great - the only thing is that the stock pedal from the roadster is way too short and I can't use the whole surface of the mini board to rest my foot - Any ideas on how/where to get a longer pedal??
Anyone had experience with Galfer semi metallic pads? I really want to get the EBC sintered pads, but the Galfers are the only ones in stock and I want to change them this weekend.
I want to install this LED brake light on my 2015 R3T. Can I just connect to my stock brake light wire? On the stock wiring, which is the brake light wire? Red or blue?
Hey, I'm about to take the rear caliper off so I can pull the pistons and polish them in the hopes of stopping the one that is sticking on me. Question is, according to the manual I need to lift and support the rear of the bike. How necessary is that part? Can I do it without lifting the bike...
Took the reservoir cap off the front brake when i flushed the brake system and reinstalled it but noticed it was leaking. May have over torque it. Bought a new seal and problem solved. This time used the torque wrench instead of my mechanical IQ. Have enough brains to buy a good torque wrench...
Replaced my brake pads. 9000 mile mark. Ceramic pads from Amazon. Don't think I like them. Stopping distance. Just not getting that firm short stop feel to it. Try something else i guess.
Hi All. Anyone know where I can get front fender break pipe clamps from now? Saw good quality after market metal ones some time ago on eBay (chrome or black) but now they don't seem to come up on any listings.