The UPS Store gave me a lesson in shipping one ugly BearClaw today. I went out in the garage and pulled one ugly bearclaw from the shelf that was already wrapped with bubble wrap. Unable to find a suitable box I headed to The UPS Store for packaging and shipping. I handed one ugly bearclaw to...
I have seen a few photos of this done and it is the look i want until I can justify fitting a slimmer radiator.
The question is how do you paint chrome? The radiator shrouds are plastic and the bearclaw metal. I imagine the grill would be best powder coated.
Thanks
I finally have the K&N Water resistant pre-filters for the UnderBearclaw triple filters on the website.
The water resistant pre-filters, according to the manufacturer, pose very little, if any restriction. They effectively exclude water and moisture from reaching the filters if you ride in the...
I have found an issue with the Bearclaw on my 2008 Rocket 3 Classic, hope I can get some help;
The bearclaw is attached with two bolts; one in the front and one in the rear of it. However, it also is supposed be attached in the middle with a "location clip" pn 5571120-001 which is supposed to...
Anyone try to put carbon fiber over their bearclaw? This mod is purely cosmetic.
I've seen people do this for interior car trim.
Seems pretty straightforward.
Has anyone seen or heard of anyplace selling something that bolts to the same place as the bearclaw but is cut to show off the triple filters? I've seen a few guys here have done it themselves with various materials and designs, but for some of us we just don't have the tools to do it right...
I have a dumb question. I gave a cursery look at mine the other day. I was rolling around on my stool, tightening loose nuts, bolts, etc..., and came to the dreaded BearClaw. I didn't see how to take the thing off. Is it a pop on/pop off type deal or are there actually nuts and bolts on the...
Hey ladies and germs....
The Bearclaw Forum is for general Rocket and Motorcycle chat and the Final Drive is for off topic stuff like racial slurs, Monkeys telling jokes and naked Democrats.
I just did a bunch of housecleaning moves so if you can't find your thread it probably landed in the...
What you need:
From K&N: 3 x Ru-2780
62-1340 (for crankcase breather)
62-1560 (for air temp sensor)
If you have Tuneboy or PCIII and are eliminating the O2 sensor an M18 oil pan bolt is needed to plug the exhaust header.
I also recommend a Dynojet O2 eliminator, for two reasons, one to...
Well got up this morning with that what can I cut up today feeling, out to the garage and get the bearclaw out its from storage, first stage of the butchering process. I bolted back on I adjusted so there is a 5 mm gap around the top, will go for a longer ride around town then open road in the...
Didn't I see a thread that stated someone put a single K&N filter on the manifold & it allowed the bearclaw to stay in place. Provided a "glovebox" under the seat too.
I'll be darned if I can come across that information again. HELP!!!!!