Hi everyone I am new here. I want to buy a 2016 rocket 3 R flat black with white stripe. The bike has 2800 km so it almost new but it has sit for almost 4 year. The owner tell me he have done oil change every year. It run great ecept idle a tiny bit rough but I think new gas and a good ride will...
Well I had found a good deal on a 2022R with 7K on the clock. It was 14K. This was at a RideNow dealership. Made 2 trips and the 14k became 17.5k. Oddly they have corporate policy of no test ride on sport bikes. You need to sign the paperwork to purchase and AFTER purchase they have you...
Hi all
Had a nail puncture my rear tire today. With some effort I had one of my boys pick me up with a trailer but it made me wonder what I would’ve done if they weren’t available. Do any of you travel with a puncture kit and small compressor? And if so, what kind of kit do you use? And I assume...
Hi, I am finally sufficiently motivated to convert my 2008 Classic to FA by turbo.
Tried to do my due dilligence, and have read whatever I could find on the subject. But I am relying on a friendly crowd. I certainly know the enginuity and wisdom is available here:)
Purchases:
-Aerocharger 8 psi...
I am in Houston, TX.
I hoping to get some advice on a price for my classic Rocket III with around 19K on the clock.
It is in very good condition and well maintained. Always garage kept.
I have lots of upgrades (still have all original parts). I am better off to put old components back and sell...
New here, second post. Not new to tuning nor modding motorcycles but new to Triumph and finding my way here.
New to me 09 touring, stock. Will be adding at an intake of some sort and some sort of exhaust mod. (I'm cheap and good with stock look so. so far I'm thinking K+N filter and removing the...
Hi all, I really want to buy a Rocket 3R, not new, probably 2 or 3 years old, but have some misgivings about the running costs and a few other bits. I know these monsters only do about 30mpg, but that's OK, I have heard that doing the valve clearances can cost around a grand and need to be done...
I bought 2 sets of these LED Turn Signal Front & Rear, Triumph Rocket 3 R GT turn signals. I am wanting to know if I can just swap these out myself and not have to worry about flashing the ecu after? I can not find where I read it before but there was a set of lights that you had to do...
I picked up that GT yesterday. What I saw at the dealer did not turn me on. So I am turning to you folks for experience and advice.
First of all would be saddlebags & mounting hardware. #2 is a set of crash bars. #3 A taller windshield. I did the purist thing back in the 60s , when wimps...
Hi all. Have installed a set of Paul Bryant exhausts (cat delete included) and a ram air filter.
Any advice on the best tune to install? Have searched and searched with the result I’m more confused than when I started (it’s not hard to be fair to confuse me!).
Appreciate any insights or...
I've been riding bikes for 56yrs now and starting to wind down but still have the bug. I Currently own a 1983 Honda V-65 Magna with 21k on it and purchased new. My question is looking to upgrade to a 2023 Triumph Rocket 3 GT. Is there any bad quirks about this bike that I should know of like...
I have an 05 with a stock air box configuration and full Jardine exhaust and have been looking at either buying the K&N pod filters or Ramair as an upgrade over the stock but I have an issue. I was tearing the bike down to get a good visual inspection and found a Power Commander III with an...
Hello everybody,
I’ve been trying to install the OEM heated grips (A9638014) for my ‘15 Roadster.
According to the instructions, it says I should have 3 colored wires for the switch. However, the kit came with black, pink and red colored wires which doesn’t match the instructions.
Any help or...
Hi All,
Glad to be here and part of the team....Getting Ready to take ownership of my new Rocket 3GT on the 1st of Sept (New Reg), Its my first New Bike ever.... and really dont know what to do to it to make it my own, other than the list of extras im bolting to it, so any help and guidance...