Search results for query: *

  1. Bedifferent

    Rocket GT Relay Location

    Just curious....Anyone know where the new rocket relays are located? They were very accessible on my old touring. I suspect on my new bike, not so much. Nothing ever stays simple. 😢😱
  2. Bedifferent

    Pannier Treatment

    Has anyone used a silicone waterproofing spray treatment, like you use for boots and shoes, on the back side material of the panniers? I'm not looking to make them waterproof, but it might help keep them looking good and help with cleaning if they get dirty from getting caught in the rain...
  3. Bedifferent

    Ambient Temperature Indication Inaccurate

    I noticed on my new 23 GT that the air temperature on my display is only correct when I first start up the bike. I'm not sure where it pulls this information from, but it continues to rise as I ride the bike. Over time, it usually is as much as 15 to 20 degrees higher than the actual ambient...
  4. Bedifferent

    For Sale SOLD....Rocket 3 Long Haul Touring Seat With Backrest

    Triumph Rocket 3 Touring Seat with a Backrest...I’m selling this seat as I no longer own the bike. The seat is in mint condition with no tears or defects. It has been well taken care of and is in excellent condition. $350.00 plus $40.00 shipping. I'm only guessing at the shipping as I'm sure...
  5. Bedifferent

    R3T Floorboards Have To Go!

    I haven't made a post in awhile highlighting my latest project idea, so here it goes. Have you ever notice how big and in the way the floorboards are on the R3T. I can barely get my legs out past them to get my feet on the ground when stopping. They are so long, wide and in the way it is hard...
  6. Bedifferent

    R3T Oil Pressure Sensor Change...Question

    My 2015 R3T oil pressure light has been flickering on and off. So far this occurs only after startup but it may go on and off for a couple minutes. I do not hear any evidence of oil pressure issues with the engine and have not had any issues after warmup or on the road. It has never done this...
  7. Bedifferent

    Charging voltage question..

    Several years ago I updated my voltage regulator/rectifier to a SH847AA series regulator/rectifier. I later installed a small dual USB port with a small digital volt meter display in it as well. I did this for being able to charge my phone and being able to use it for GPS and such while...
  8. Bedifferent

    Want to Buy Black plastic trim piece on the finsl drive

    I cracked that black plastic trim cover today that bolts on the final drive. I did it replacing the rear tire. It needs to fit a 2015 Rocket 3 Touring final drive. Thanks!
  9. Bedifferent

    Routine Maintenance Question-Coolant Exchange.

    I'm big on doing my own routine maintenance on my 2015 R3T. In the spring I plan to do another rear tire, splines, battery and brakes all around. In addition, I'll be doing ...a new fuel filter and brake fluid exchange. My question is....how many people go through the hassle of draining and...
  10. Bedifferent

    I finally made some lowers-Foot warmers

    Hi Everyone, I've been off the forum for quite some time (no reason in particular...just busy doing other things I guess) and I thought I would make this post. I saw I started a version of this post way back in 2017 about "Pondering Making Some Lowers". Well, I decided enough cold toes and...
  11. Bedifferent

    A question about the crankcase breather filter...

    When I installed my RamAir last summer I never put on the crankcase breather filter supplied by RamAir. I originally planned to put a hole in the RamAir housing and then run a hose from the crankcase vent to the RamAir. Instead, I simply left the hose hook up that runs into the air filter box...
  12. Bedifferent

    Lock your doors, the beast was out of its cage!

    It was 55 degrees here in Michigan today. We have had several rainy days, so the salt was off the roads. I decided to "Release The Kraken" for a little riding time. With the monster out of its box, I had a chance to try out my new Spidi Superstorm H20ut Pants from Revzilla. They really work...
  13. Bedifferent

    Rear Tire Install Dolly...Making My Life Easier... I Hope!

    I haven't posted one of my crazy ideas in a while so here goes another one. I just finished making this tire roller dolly to be used on my next rear tire change. The last time I removed and put the rear tire on myself I was fighting for two hours trying to get it back on. Much of the time was...
  14. Bedifferent

    Another Head Weeping Followup

    I have made several posts about this and here is the original Tell me this isn't happening!! I decided to try this fix and see what happens. I have outlined what I did as follows... After deciding the most likely spot of where my oil weep was on the head, I decided to fix things with least...
  15. Bedifferent

    Centerline distance between buckets and valves

    If you have your valve cover off or a spare head laying around, do you know what the centerline distance is between the shim buckets on the rocket. I assume it would be the same as the centerline distance of the valve stems. Just gathering some info for the shim tool. After getting some...
  16. Bedifferent

    Well, I finally needed to do the RamAir and Nels Tune

    I've been running the TORs on my R3T along with just the Power Tripp tune and today was the day I decided to make some changes. It has been 90 degrees with high humidity here in Michigan and today it finally cooled down to the mid 60s. I noticed some issues with my bike, in particular, not...
  17. Bedifferent

    Clutch Cable Length Pictures...Rivco

    Hi all....Someone wanted to see pictures showing the difference between a 1 1/2" longer clutch cable and a 2 1/2" longer clutch cable when swapping out for the Rivco Risers. I just changed mine out using the 2 1/2 ". I suppose 2" might be a compromise. I prefer a little smoother arc...
  18. Bedifferent

    Tell me this isn't happening!!

    I notice some oil wetting around my cylinder head below the VC gasket and near the chain tensioner. The oil does not appear to be coming from VC gasket. Upon close examination it looks like it may be a casting porosity issue with head and oil seeping to the surface. My search on the forum has...
  19. Bedifferent

    FYI...Clutch cable length and Rivco Riser

    As you know, from my other post, I finally got the risers on my bike. On forum advice I got a Barnett clutch cable 1 1/2" longer. I put it on today and while it works, it is at the bare minimum for length and I'm sorry I did not do 2" or 2 1/2". I guess I should have checked a few other posts...
  20. Bedifferent

    Oh no! Not another shim removal tool post.

    :banghead: You are probably sick of the shim tool, but I thought I would post one more version I made. I fabricated one of the posted tools for Paul, but he expressed some concerns with the tool ideas. He was concerned about having only one of the screws in place on what he described as a...
Back
Top