Search results for query: *

  1. BSA Bob

    LSR Turbo Rocket III, part two

    Hi, I don’t have access to most of my parts or information just using my memory which ain’t very good I’ve ridden less than 1000ks in the last year as my bike’s in storage, and I’m running out of money building this house it’s harder than I expected I’ve grown older, but not up
  2. BSA Bob

    LSR Turbo Rocket III, part two

    I think you’re right 0.40mm not 40th
  3. BSA Bob

    LSR Turbo Rocket III, part two

    You’re right. I think it might be 0.40mm not 40th.
  4. BSA Bob

    LSR Turbo Rocket III, part two

    Sorry I don’t know, but mine was 50 - 80 coming from the filter end from memory I’ve taken the original motor out and put a 2nd hand 07 one in, so I can hot the original 09 up The head has solid cam buckets, bees hive valve springs, over size valves, and APE head studs, ( not torx bolts...
  5. BSA Bob

    LSR Turbo Rocket III, part two

    Someone suggested to me to put a 1mm shim / washer at the relief valve. I have 9-1 J&E piston and I’m not sure how much more compression there will be with the stroker kit I also have 2 extra injectors which work at full boost I only have a PC3 and a microtec boost computer it puts out 305 HP...
  6. BSA Bob

    LSR Turbo Rocket III, part two

    I’ve a lot of new parts for mine ( head, cams, stroker kit, back cut gears ) but I’m building a new house so I don’t have the money, place, or time I like your work … my oil pressure gauge pickup came from the sandwich plate which also had feed / return for the oil cooler, and oil feed to the...
  7. BSA Bob

    LSR Turbo Rocket III, part two

    I can’t wait for episode 3
  8. BSA Bob

    ovesized inlet valves

    Hi the stroker crank should arrive soon the balance shaft has just been done to match the crank, I’ll finish putting the roof iron on the house in the next couple of days, then it’s harvest time ( grain crops ) I’ll send the clutch basket to MTC for a billet one thing’s are hard to ge, and...
  9. BSA Bob

    Coil Over Plug mod (COP) for standard coil removal

    I think if you find a Triumph with a similar plug ( range )you should be ok
  10. BSA Bob

    New Zard Pipe for the 2500cc

    I thought that was a burnout pad
  11. BSA Bob

    ovesized inlet valves

    The world’s fastest time trials car Porsche inline 4 4ltr
  12. BSA Bob

    ovesized inlet valves

    Billet 4 cylinder 4 ltr. porsche in-line race motor heads by Rams head service
  13. BSA Bob

    ovesized inlet valves

  14. BSA Bob

    ovesized inlet valves

    The stroker it should be here in August
  15. BSA Bob

    ovesized inlet valves

    I’m also trying to build a house at the moment and the bike is in one of the small sheds waiting for a new shed after the house I still ride it with my spare motor in it ( stock ) I’d like Haltech ecu and dash + a billet clutch baske I’ve got billet cams, and gears backcut with a billet 4th gear
  16. BSA Bob

    ovesized inlet valves

    There’s some Honda parts, ferrea valves, ARP head stud kit to hold it down... the buckets are a lot cheaper than stock, and easy to find with so many different sizes th
  17. BSA Bob

    ovesized inlet valves

    I hav i haven’t got all the parts I want yet ... they are coming though I have a bill crank on order
  18. BSA Bob

    ovesized inlet valves

    It has solid lifters ( no shims ) you replace the whole follower ( differret thicknesses )
  19. BSA Bob

    ovesized inlet valves

    Mine have 5 angles
  20. BSA Bob

    ovesized inlet valves

    Do you have any bench flow charts so I can compare mine with them
Back
Top