Recent content by Ianrocket

  1. New member from Michigan with the dreaded "click problem"

    Here are some pictures of the old clutch and new parts, the old one only ran for 18 months but they didn't bother to admit a bad design or fault

  2. New member from Michigan with the dreaded "click problem"

    hi from Woking in England. It's very simple fit a fused larger cable directly to the starter and the one coming from the button fit to a relay somewhere down that cable. Do the same to the front lights, via a new fused cable with two relays for high and low I have a 2006 model, don't listen to...

  3. New member from Michigan with the dreaded "click problem"

    I had the same problem. I changed the relay with no change . It was too with the power going to the relay. I put a in-line relay with a thicker cable going through from battery to the starter solenoid ,,,, problem solved. Bigger kick to the solenoid

  4. Hi I'm new on here and have a little problem with my clutch.

    Great thanks for the excellent reply, this is exactly what I thought. So I can still change over to the newer version, ???? Is this correct. Would you know the part numbers of the new parts

  5. Hi I'm new on here and have a little problem with my clutch.

    I have a 2006 rocket 3 and the clutch pull arm broke and put a mark/groove in the pressure plate so after reading a few comments on here I ordered from fowlers the pull arm, thrust bearing, washers,pressure plate, and a new arm to go to the cable. I ordered the newer pull arm and got sent the...
See more
Back
Top