3 filter mod.

[deepinder]

As the caption suggests I want to do a 3 filter mod while keeping the bear claw intact. Why options do I have. And any after market claws in case I want to expose the filters?

 

[CanberraR3]

There's a K&N option which many of us have run at some stage and these fit under the bear claw. Have a look in www.flipmeister.com. Also the Ramair filter, although I'd be waiting for an improved version before going that route. Don't worry too much about cutting the bear claw. A new one is probably cheaper than any aftermarket options.

Lots of info on here, but you could start with these but if you do a search you'll get lots of ideas.
http://www.r3owners.net/threads/3xk-n-cut-bc-done.10185/page-3#post-110076
http://www.r3owners.net/threads/how-to-install-triple-k-ns-under-bearclaw.3710/

 

[deepinder]

Thanks. So what k&n filter can fit nder the bearclaw without chipping or cutting it. Don't want to go that route right now.

 

[Steve8319]

Thanks. So what k&n filter can fit nder the bearclaw without chipping or cutting it. Don't want to go that route right now.

Deepinder, see here. It looks like some folk have had problems with the rubber splitting around the jubilee clips but many have not.

 

[CanberraR3]

Thanks. So what k&n filter can fit nder the bearclaw without chipping or cutting it. Don't want to go that route right now.

If you look at the 2nd link I posted above it's in the very 1st post -
K&N RU 2780. Go through that thread and see how it's done as well as lots of options for trimming the bear claw if you want to. However, with those filters you don't need to. It should be pretty clear!

 

[deepinder]

Just ordered the ram air. Will take the plunge and see how it goes. Keep u guys posted. Appreciate all the help here. On many of my posts. Cheers.

 

[GRAMPY]

Deepinder, see here. It looks like some folk have had problems with the rubber splitting around the jubilee clips but many have not.

Ever so grateful for that, thanks again---You're the top Banana..------ancient Brit saying--

 

[Steve8319]

Ever so grateful for that, thanks again---You're the top Banana..------ancient Brit saying--

Ic þē þancie ------ Saxon saying

 

[Blackthou]

WTF does that mean - modern saying

 

[Steve8319]

WTF does that mean - modern saying

I thank you.. pronounced ich they thankeeyaa. Surprisingly familiar after a thousand years.